Ok - not really a fight, but I’ve been riding the Expedition now for three weeks, covering a little over 200 miles, which seems long enough on the new machine, and away from the Pocket, to be able to make a reasonable comparison. And I thought some of this information might be useful first for anyone who also has a Pocket who might be considering moving to an Expedition, and secondarily to folks thinking about moving from a trike with a 20" rear wheel to one with a 26" wheel.
There are differences in equipment between the two machines. I detailed that a couple of weeks ago, and you can look back if you are curious. But for now, let the Cat(trike) fight begin!
The Expedition feels bigger than the Pocket and, given that it is bigger, it should. But when I say "bigger", I would say that it gives the impression of being more substantial as opposed to feeling heavier. I don’t really get the impression that I’m hauling more machine around in terms of it being more work. It’s just more substantial.
What this does translate to, tho, is comparatively less of the "go-kart" feel you get with the Pocket. This is not suggest that the Expedition is not a lot of fun to ride, but the sensation is different. To make an automotive comparison, the Pocket handles reminiscent of, say, a Triumph Spitfire or Mini Cooper S, while the Expedition is closer to a late 70’s Camaro (these may be somewhat idiosyncratic examples)...
(Yes - that boy is painfully young, and even I can see the teenage attitude)
All of which is to say that it handles well, but it’s not quite as immediate a handling experience as with the Pocket. This may change with additional experience, but I suspect not much - I think this is a factor of additional length.
Enjoying this post? Check out our Cycling page for links to other cycling articles on Applied Life
That additional size does also translate into additional carrying capacity, and I am finding that the new pannier bags work quite nicely. I can easily see carrying back a growler from a brewpub in them. It’s also pretty clear that I’m going to have an easier time hooking up my trailer when I finally get around to finishing it.
The size does have an impact on transportation as well - at least potentially so. The Expedition does fit in my Honda Fit (it fits in the Fit). The primary difference between the two machines is that, with the Pocket I can also bring along a passenger. To accommodate the extra length of the Expedition I have to move the passenger seat all the way forward on its track, lean it forward, and remove the headrest (because it blocks the right side rear view mirror).
I should say that this scenario involves me making no changes to the trike - I could put in the boom and would likely gain several inches. However, I did try this once and found it very difficult to slide in (by design, I believe). I’ve received several suggestions regarding this, including carrying along a rubber mallet to assist with moving it and putting talcum on the boom to make it slide more easily. I think these are good ideas, and I may try them in future, but the overwhelming majority of the time I don’t really need to accommodate a passenger, so the motivation is fairly low. And I could either strap it to the roof or set up a trailer with the car if I really need to (I do have one). As such, this is more of a difference than an inconvenience. And realistically, over the past couple of years my car has essentially become a rolling trike garage anyway. Passengers may just have to find their own way home.
One of the more common questions asked by people new to recumbent trikes is whether they are faster than Diamond Frame (DF) bikes, and/or how fast a given trike will go. Answers to this often fall into the accurate but unsatisfying range of either "it depends" or "it’s up to the motor (you)". Setting aside the fact that there is almost certainly a technical, gear-limited top speed for each machine, it’s generally a frustrating example of the real world failing to provide simple answers.
For my part, I had hoped that the Expedition would be faster than the Pocket, but based upon other people’s descriptions and experiences, I didn’t necessarily expect that to be the case. Yes, the Expedition has a larger rear wheel with the same (well - similar - 10 Speed vs. 9 speed cassette) gearing, and so technically a higher top speed capability. But I cannot say that I was routinely pedaling past the gear limits in top gear on the Pocket, so I wasn’t sure what to expect.
And - before we get to what I’ve found thus far - there is an introspective part of the middle-aged me that wonders at why I’d want to go faster. While I’d love to ride more for actual transportation, the reality is that the overwhelming majority of the time I ride for pleasure and exercise. What exactly is the upside to making that go by more quickly?
But the truth is that there’s still a fair amount of that kid with the Triumph in there. He’s not necessarily rational, and might have purchased a series of other poorly conceived sporty cars over the years to meet that need (but I digress...).
So what is the deal with speed? Well:
Yeah - The Expedition is faster.
That’s right, hands down, full stop - it’s just faster. What you see in the graph is a comparison between the lifetime average of the Pocket, the Expedition, and (for fun) my Cannondale SR400, which was my primary machine before getting the Pocket. And as can be seen, the Expedition is faster than both of them.
Now, there are some qualifications needed here to understand what this is showing:
- The Cannondale referred to is a 1987 Cannondale SR400. It is a 12-speed aluminum road bike from the era of Madonna and Duran Duran and Mötley Crüe - it is not a modern machine. However, it was my regular ride for years, it is all of 22 lbs, and tho I prefer to ride the trikes now, I still think it’s a very elegant design. More details on it can be seen in the Cannondale catalog from 1987, and the bike itself is pictured below.
- The averages for both the Cannondale and the Pocket reflect far more miles over much more varied conditions - including winter riding (which is always slower). The distance on the Expedition thus far is only 204.89 miles vs 2901.35 for the Pocket and 2462.47 for the Cannondale
In order to compensate for the difference in number of rides I thought it would make sense to compare on specific routes. I compared overall speeds on the routes, and then also went thru and, where possible, did a comparison on the last three rides on each of the routes on the Pocket - all of which were in the last couple of months - in order to remove any effect of winter riding on speed (except the Inlet route - I’d only ridden that once on the Pocket, and that was this spring). That is shown in the table and graph below:
The outcome: The Expedition is faster.
Removing the effect of winter riding for the Pocket definitely makes it faster (snow is fun, but it slows you down), but the Expedition is still faster. It’s faster than the Pocket, and actually faster, on average, than the Cannondale.
I say "on average" here, because the LP route presented is the one that I ride most often. This is a function of convenience - it’s a bike path right by one of my worksites. It involves a hill climb up from the Rock River of about a half-mile or so. My fastest time on that route is still held by the Cannondale - 31:51 for the 8.44 mile loop at an average of 15.90 mph. But I beat my PR on the Pocket with the Expedition on my first ride on the route. And this despite the potential disadvantage of the larger rear wheel on climbing.
So yeah - faster.
The Pocket is a 2012 model, and it came with grip shifters.
The Expedition has bar end shifters, as does every Catrike model currently on the site, including the Pocket, with the single exception of the Eola. My impression from participation from online groups is that people generally prefer the bar end shifters.
I am finding that I miss the grip shifters a bit.
I like the indexed nature of the grip shifters - each click is a gear. The bar end shifters aren’t really indexed - you can feel them drop into gear, of course, but shifting with them is much more reminiscent of the downtube shifters on the Cannondale. Usually it’s fine, but sometimes I have to adjust a bit to get right into the spot.
The other difference here is location - which is to say that I have to move my hand up to the top of the hand grip in order to shift, instead of just making a quick twist of the wrist. I’ll grant that this is a small thing, and I’m quickly adjusting to the bar ends, but it’s not (yet) as automatic as the grip shifters.
While I’m in this area, I’ll note that that the handgrips on the Expedition are a foam material that gives the impression of less durability than the rubber (or rubberized plastic) of the grip shifters. I have had no difficulty with them thus far, and I’ve never seen anyone complaining about these, so I’m not expecting that impression to be true, but that was my initial impression nevertheless.
The Expedition comes with the wrist rests on the handlebars, which is not a feature I have on the Pocket. This is nice, and I’ve found myself with my hands relaxed on top of them over long stretches. This sort of replaces my habit of on the Pocket of resting my wrists on top of the grips where the mirrors mount (and maybe will result in a longer lifespan for the mirrors). And speaking of those...
The Pocket (or at least my Pocket, anyway) puts the mirrors on the end of the handle grips. This option goes away because thats where the shifters are on the Expedition, and instead there are separate stalks for the mirrors. The stalks are, quite simply, excellent! Not only does it get the mirrors out away from you a bit, but it also provides additional space to mount other things. Right now I’ve put my phone mount on there, which places it much closer in reach than its previous location on the boom.
And there’s room on it for other things - I’m considering a bell for trail riding (I’m often surprised by the number of people who are still startled by me after I’ve called out "on your left" - apparently they didn’t think I meant their left...).
The Pocket didn’t come with a neck rest (and doesn’t from the factory), so there’s no direct comparison here. In fact, given the angle of the seat, it doesn’t really need one. I installed a Power-On Cycling neck rest myself, but this was more to get A) a higher mounting point for a taillight; and 2) give myself a handle for walking the trike. On rare occasion, on longer rides, I would lean my head back and rest it against the pad, but I really didn’t even have it in a position to work as a neck rest.
The Expedition has a greater degree of recline: 37° vs 41° for the Pocket. A difference of 4 degrees doesn’t seem like a lot on paper, but it’s enough to make you want to use the neck rest. I had sort of planned to order another neck rest from Power-On when I got the Expedition - again, mostly because of the elevated mounting point for the taillight - but I figured I’d hold off until I had a little experience with the stock model (and save a little coin if I could).
I was able to sort out how to get a taillight mounted on the stock headset.
And the Expedition is tall enough that, between the neck rest and the handle on the pannier bags it’s easy enough to walk it as it sits. The stock neck rest that it comes with works fine in terms of getting into position to lean against while riding. This would all be great, and represent a cost saving, but I am finding that it makes my neck a bit sore over rough terrain. I’ve ordered the Power-On rest.
Clipless Pedals and Shoes
As I mentioned in my initial comparison, I’d never used clipless pedals before. They weren’t a thing when I was a kid (I think versions of them existed, but farm kids riding around the countryside were not a target market). My Cannondale had toe clips (the cages or stirrups) when I got it, and I found those worked quite nicely. On the Pocket I’d installed the heel slings from TerraTrike, and supplemented them with Velcro cross straps to better secure and facilitate a full power stroke (pulling on return in addition to pushing). So, despite the fact that this technology has been around for a while, it was new to my use.
They are... ok.
To be clear, they absolutely work as designed and advertised - you snap in, and your foot is solidly restrained on the pedal. They are also easier to get in and out of than the combination I have on the Pocket. There I have to lean forward to my feet to put them on or off (the cross straps specifically - you can just rest your feet in the slings). The clipless literally just snap in and out. And thus far, that’s the primary advantage.
Right now I have one pair of shoes - the Shimano Sandals I ordered about the same time I ordered the Expedition. The sandals, again, work as advertised, and I can walk around in them - the cleats are recessed enough that you can hear them click on gravel or pavement, but they don’t appear to affect walking. But the design of the sandal itself is visually more like something you’d get out of a bin at Wally World, something you’d keep around for going to the beach, than a sandal you’d want to wear all the time (can you tell I’m still bitter that Keen doesn’t make the Commuter Sandal anymore?).
And, of course, they are expensive, which will still leave me needing to make decisions come winter. Do I seek out specific winter cycling boots (these do exist) or get myself into a pattern of installing and removing the heel slings for cold weather months (since I already have the sandals)?
A part of this also bumps into my personal bias - which I absolutely want to acknowledge here - against cycling specific clothing and gear. While I realize that cycling is primarily a recreational activity here in the US, I’d love to see it move towards more regular use for actual transportation. I do believe that the tendency towards cycling specific gear - especially clothing and shoes - takes away from that. It can give non-cyclists who might be interested the impression that you have to get all of this extra stuff just to get started. That presents an additional, artificial barrier to entry that might discourage folks who would otherwise come on board. Cycling to work becomes all the more effort if one thinks one has to purchase an extra set of clothing, carry the change of clothes that you’ll wear while at work, and change both once you arrive and again when you leave.
And, to be clear, this is a personal bias. I know people enjoy their bespoke cycling gear, and I have no problem with that (I even have a cycling jersey myself, despite all of this). But I don’t want to see the cycling world move towards designing daily use machines that require additional specialized gear.
And maybe part of my problem here is that I am actually considering winter cycling shoes rather than just getting another set of heel slings...
Ok - off the soapbox...
To Sum Up
Overall, I’m really enjoying the Expedition. It is a faster machine and feels like it - I can tell when I’m riding that I’m moving along faster than before. As much as I try to tell myself that shouldn't matter, it just does.
Everything else is just niggles, and a lot of it will go away with additional familiarity and adaptation. Most of the size differences are already fading - it felt much bigger than the Pocket originally, but now when I look at the two machines together the impression I get is that the Pocket seems smaller - the Expedition now - already - feels like the right size.
Time to ride...